Chip: TC277TE

Vendor: Infineon Technologies AG
Family: AURIX™ TriCore™
Cores: TriCore v1.6.1, HSM, GTM
推荐配置

为 TC277TE 找到理想的工具配置

Throughout our recommended debug and trace solutions, you can easily find and select the most suitable tool configuration for your chip. Whether you need to perform simple hardware debugging or more advanced tasks such as off-chip tracing, the following TRACE32 configurations will provide you with a good starting point.

基础版调试器
硬件 劳特巴赫PowerDebug E40 ,带 AUTO26debug probe
软件 包括PowerView 软件、调试License和 1 年软件维保
上位机连接 USB 3
调试端口 1(自动 26、自动 20、自动 10)
调试时钟 10 kHz 至 160 MHz(视目标而定)
电压范围 1.8 V 至 5.0 V
多核调试 需要可选的License用于同构多核或异构多核芯片的支持
片上跟踪 需要可选的License
Off-chip trace DAP streaming via optional license
支持PowerTrace扩展的通用调试器
Hardware Lauterbach PowerDebug X51 with AUTO26 debug probe
软件 包括PowerView 软件、调试License和 1 年软件维保
上位机连接 USB 3和千兆以太网
调试端口 1(自动 26、自动 20、自动 10)
调试时钟 10 kHz 至 160 MHz(视目标而定)
电压范围 1.8 V 至 5.0 V
多核调试 需要可选的License用于同构多核或异构多核芯片的支持
片上跟踪 需要可选的License
Off-chip trace DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
支持PowerTrace扩展的通用调试器
Hardware Lauterbach PowerDebug X51 with AUTO26 debug probe
软件 包括PowerView 软件、调试License和 1 年软件维保
上位机连接 USB 3和千兆以太网
调试端口 1(自动 26、自动 20、自动 10)
调试时钟 10 kHz 至 160 MHz(视目标而定)
电压范围 1.8 V 至 5.0 V
多核调试 需要可选的License用于同构多核或异构多核芯片的支持
片上跟踪 需要可选的License
Off-chip trace DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
支持PowerTrace扩展的通用调试器
Hardware Lauterbach PowerDebug X51 with AUTO26 debug probe
软件 包括PowerView 软件、调试License和 1 年软件维保
上位机连接 USB 3和千兆以太网
调试端口 1(自动 26、自动 20、自动 10)
调试时钟 10 kHz 至 160 MHz(视目标而定)
电压范围 1.8 V 至 5.0 V
多核调试 需要可选的License用于同构多核或异构多核芯片的支持
片上跟踪 需要可选的License
Off-chip trace DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
支持PowerTrace扩展的通用调试器
Hardware Lauterbach PowerDebug X51 with AUTO26 debug probe
软件 包括PowerView 软件、调试License和 1 年软件维保
上位机连接 USB 3和千兆以太网
调试端口 1(自动 26、自动 20、自动 10)
调试时钟 10 kHz 至 160 MHz(视目标而定)
电压范围 1.8 V 至 5.0 V
多核调试 需要可选的License用于同构多核或异构多核芯片的支持
片上跟踪 需要可选的License
Off-chip trace DAP streaming via optional license, AGBT/SGBT via optional PowerTrace Serial
利用经济高效的 PowerTrace II Lite 进行串行跟踪 (AGBT)
Debug Hardware Lauterbach PowerDebug X51 with AUTO26 debug probe
跟踪硬件 PowerTrace II Lite 带串行跟踪探头和 AGBT 适配器
软件 包括PowerView 软件、调试License和 1 年软件维保
多核支持 通过可选的License支持同构或其他架构多核
电脑连接 USB 3 和千兆以太网
调试端口 1(AUTO26、AUTO20、AUTO10,22 引脚 AGBT)
串行跟踪通道 最多 4
记录速度 双通道时每通道 6.25 Gbit/s,4 通道时每通道 3.38 Gbit/s
流媒体 100 MByte/s
追踪记忆 1 GByte
信号探测 不可用
串行跟踪(AGBT),带通用 PowerTrace III
Debug Hardware Lauterbach PowerDebug X51 with AUTO26 debug probe
跟踪硬件 PowerTrace III 带串行跟踪探头和 AGBT 适配器
软件 包括PowerView 软件、调试License和 1 年软件维保
多核支持 通过可选的License支持同构或其他架构多核
电脑连接 USB 3 和千兆以太网
调试端口 1(AUTO26、AUTO20、AUTO10,22 引脚 AGBT)
串行跟踪通道 最多 4
记录速度 3 车道时每车道 6.25 Gbit/s,4 车道时每车道 5.00 Gbit/s
流媒体 400 MByte/s
跟踪存储 8 GByte
信号探测 通过可选的混合信号探头
带 USB 的调试器,用于 DAP 数据流
硬件 带CombiProbe 2 和 AUTO26 Whisker 的 PowerDebug E40
软件 包括PowerView 软件、调试License和 1 年软件维保
上位机连接 USB 3
调试和跟踪端口 1(自动 26、自动 20、自动 10)
多核调试 需要可选的License用于同构多核或异构多核芯片的支持
追踪记忆 512 MByte
信号采集 通过选配的Mixed-Signal Probe
带以太网/USB 的调试器,用于 DAP 数据流
Hardware PowerDebug X51 with CombiProbe 2 and AUTO26 Whisker
软件 包括PowerView 软件、调试License和 1 年软件维保
上位机连接 USB 3和千兆以太网
调试和跟踪端口 1(自动 26、自动 20、自动 10)
多核调试 需要可选的License用于同构多核或异构多核芯片的支持
追踪记忆 512 MByte
信号采集 通过选配的Mixed-Signal Probe
带USB的“DAP over CAN”调试解决方案(DxCPL/DxCM)
硬件 PowerDebug E40,AUTO26 debug probe 和 CAN 盒
软件 包括PowerView 软件、调试License和 1 年软件维保
上位机连接 USB 3
CAN 连接器 9 针公头 D-Sub 连接器
多核调试 需要可选的License用于同构多核或异构多核芯片的支持
使用以太网/USB 的“DAP over CAN”(DxCPL/DxCM)调试解决方案
Hardware PowerDebug X51, AUTO26 debug probe and CAN Box
软件 包括PowerView 软件、调试License和 1 年软件维保
上位机连接 USB 3和千兆以太网
CAN 连接器 9 针公头 D-Sub 连接器
多核调试 需要可选的License用于同构多核或异构多核芯片的支持
Debugging via Calibration Tools (XCP)
支持的API 通用测量和校准协议(XCP)
内容 包括PowerView 软件、front-end license、XCP backend-license和 1 年软件维保
许可证选项 Trace decoder license
通过第三方应用程序接口进行调试
支持的高级应用程序接口 MCD、GDB、CADI、IRIS、GDI、ARCINT(取决于 CPU架构)
支持的低级应用程序接口 XCP、GTL、CSWP、SPP、VPI、DCI.DbC、Tessent/USOC(取决于 CPU架构)
内容 包括PowerView 软件、前端许可证和 1 年维护
许可证选项 用于底层API的后端许可证, 跟踪解码器许可证
指令集Simulator
Simulator Simulates the instruction set of an architecture family (including its subfamilies)
可扩展 可连接内存映射外设的模型
自动测试 附带的许可证允许使用simulator.NET Framework 进行自动测试。
内容 包括PowerView 软件、simulator 许可证和 1 年维护